CARA CONFIGURASI SSH PADA SWITCH CISCO



PC>

PC>telnet 10.10.10.2

Trying 10.10.10.2 ...Open

User Access Verification

Password: cisco

S1>enable

Password: cisco

S1#configure terminal

Enter configuration commands, one per line. End with CNTL/Z.

S1(config)#service password-encryption

S1(config)#ip domain-name netacad.pka

S1(config)#crypto key generate rsa

The name for the keys will be: S1.netacad.pka

Choose the size of the key modulus in the range of 360 to 2048 for your

General Purpose Keys. Choosing a key modulus greater than 512 may take

a few minutes.

How many bits in the modulus [512]: 1024

% Generating 1024 bit RSA keys, keys will be non-exportable...[OK]

S1(config)#user administrator password cisco

*Mar 1 0:2:28.954: %SSH-5-ENABLED: SSH 1.99 has been enabled

S1(config)#line vty 0 15

S1(config-line)#transport input ssh

S1(config-line)#no password

S1(config-line)#login local

S1(config-line)#end

S1#exit

[Connection to 10.10.10.2 closed by foreign host]

PC>ssh -l administrator 10.10.10.2

Open

Password:

S1>enable

Password:

S1#

selesai silahkan mencoba yaa :)